So you’ve bought the first flash light, and are waiting for all the possibilities that it brings. You take it out of the box and … what’s next? In this article, we will share with you The experience of turning on and taking pictures with the most beautiful natural flash. Please refer to the release of the most beautiful, delicate and impressive photos to satisfy your passion for photography!
Step 1: Insert a separate flash into the light slot on the top of the device, and turn on the power. Note: When completely installed, you need to slide the mounting pin to fix the lamp.
Step 2: Start setting the lamp mode setting using the flash control menu in the Menu. You must note that the previous shooting settings have been cleared before the new settings. If not, just click clear settings and select clear external flash set.
Step 3: Choose a flash mode that suits the subject of the photo shoot.
There are 2 available modes: E-TTL mode (Evaluative Through The Lens) or Manual flash mode.
E-TTL II flash metering mode is the default mode on the flash that makes the flash fire automatically. In this mode, the flash fires automatically, and the flash power measurement function is automatically determined by the camera. This mode is ideal when you want to take snapshots using the exposure level determined by the camera’s metering system.
Manual flash mode (mode M) allows you to set the flash output level you like. You can use this mode when you need more control over the flash output, as is necessary for professional-level flash photography.
Step 4: After selecting the light mode, you need to choose a shooting mode to suit the intention and content of the photo you want to take.
Turn the mode dial and choose the desired shooting mode. Choose Shutter-priority AE when you want to capture moving subjects without motion blur, or use motion blur to show movement. Choose Aperture-priority AE if you want to adjust the depth of field to use the bokeh effect, or to perform deep focusing techniques. Choose based on your intention.
Step 5: Choose a shutter sync mode
After selecting a shooting mode, select a flash sync mode. Use high-speed sync when the desired shutter speed is higher than the maximum speed that the flash can sync. Consider using first-curtain sync or second-curtain sync for long exposure photos.
Step 6: Adjust the ISO speed
This will affect the exposure and finishing of the image. And what you need to do is press the “ISO” button to set the sensitivity in the menu.
Step 7: At this time, you should use exposure compensation to assist with the lighting of the background.
Usually, in flash photography, light from the flash does not reach the background. In such situations, exposure compensation can be applied to adjust the brightness of the background, especially when it is outside the bounds of the flash. On medium and high-end cameras, compensation can be set by turning the Quick Control Dial while half-pressing the shutter button. For models without a Quick Control Dial, hold the exposure compensation button while turning the Main Dial to adjust exposure compensation.
Step 8: Similar to the above, you use flash exposure compensation to adjust the lamp output. And it will help make the background clearer.
Step 9: Adjust the angle of the flash head
This is the stage for customized flash heads. Depending on your photography needs, find yourself the most suitable.
Experience when taking pictures with the flash
– The more diffused the light source, the more pleasant the light. A small suggestion is that you should use a hood to diffuse the light.
– You can actively change the light on the subject by changing the distance of the lamp.
– The camera flash has no effect on the background if the background is quite far away from the subject. This means that photographers are free to change positions and flash settings without concern about the posterity.
– How to take pictures with a flash often causes red eye. In order to overcome this situation, you can hold a separate flash in your hand, mount the flash on the bracket, or let the flash bounce on the wall or ceiling.
– One of the limitations of using a camera flash is that it only emits a light source. And so will create images that look unreal and dark areas much contrast.
To solve this problem, you should use multiple flash. This is also very easy to do. Most professional photographers often use 3-point lighting. One main light illuminates the face of the subject, another to illuminate the unwanted darkness and a back light to add light to the surrounding scene.